Electronics & Electrical Work Bench
Assembly : Table is made from 3 disassemblable sub assemblies  Bottom stand Pi type structure with table top drawers etc., Hind rectangular box also called as switch box to hold 1 phase and 3 phase power sources etc., optional top side rectangular box mounted on top hind or switch box to house various instrument like CRO, FG and power suppliers etc.
 
Electrical Fitting: Hind (switch) box with screw able hind ide panel to facilitate wiring and controlling 6 separate sets of 5 amp switch and 5 pin 3 phase stock proof protective Socket with 4 pole MCB with Neon indicator are provided on the facing panel of switch box.
 
`
DC Shunt Motor

DC Machine Lab-II is an important system for the Electrical laboratories. It is DC Machine Lab-II that provides comprehensive learning of functioning of a DC Motor. It can aptly be employed for performing various exercises like Motor Starting, Speed Control, N-I Characteristics etc. Thus the trainer makes the subject understanding complete.

 
  1. DC Shunt Motor
  2. Mechanical Loading arrangement
  3. Exclusive and rugged designed panel
  4. Stand alone operation
  5. Designed by considering all the safety precautions
  6. High quality meters
  7. Diagrammatic representation for the ease of connections
 
 
PID CONTROLLER

FEATURES

  1. Selectable Lowe Display : User Selectable options enable quick setting of different parameters such as set point, Alarms, PID Values, Testing etc.
  2. Special Modes: User selectable special modes such as, Heat – cool PID, Auto / Manual, Single point Ramp / soak, Soft start.
  3. Furnace  and Sensor Unit : An Heater unit used to increase the range of Temperature, and RTD Unit used to change the Resistance Valve depend up on the Temperature, An Cooler unit used the cool the increase in Temperature.
  4. It can access different levels if Set points.
  5. An LED indication is given to display the condition of the Furnace and Sensor Unit.
 
Electrical Fitting: Hind (switch) box with screw able hind ide panel to facilitate wiring and controlling 6 separate sets of 5 amp switch and 5 pin 3 phase stock proof protective Socket with 4 pole MCB with Neon indicator are provided on the facing panel of switch box.
 
DC Machine With Loading Arrangement

This is a DC motor with the above specifications. The shaft of this motor is coupled mechanically to a break drum. A belt moving over this break drum provides necessary torque to the shaft of the motor, and in turn loads the shaft with a finite torque. Two calibrated spring balances are connected to either side of the belt, which is moving over the break drum. This is a method to load the shaft of the motor with a loading arrangement. By taking reading on these spring balance readings, the loading value may be calculated.

 
 STATIC OVER CURRENT RELAY
Enclosures are made from CR sheet with duly galvanized and powder coated (texture finish).
 
  1. Necessary diagrams screen printed (gloss ink and oven treated )
  2. Necessary BTI connectors / BS-10 / BS2 Elcom make fitted.
  3. Built in fuse protection and built in over current protection.
  4. Illuminated power on / off rocker switch provided.(Elcom)
  5. Start / stop / reset switch- (Elcom)
  6. Trip status indicator
  7. 24V SMPS source unit for Auxiliary*.
  8. 230v AC source for Auxiliary
  9. DUC relay output ‘NO’ or NC’ connection facility.
  10. Necessary patch cords and power cables provided. (Elcom)
  11. LED are fitted at schematic itself for easy understand the operation. 
  12. Control relays and bases O/E/N or OMRON Contactors :
  13. Time interval internal / external selectable.
  14. Potential free ‘NO’ and ‘NC’ point to be provided for project works.
 
PLC  Based  Process Control Trainer
Clients can avail from us superior quality PLC Based Multi- Process Control System Trainer which outlines the basics of control of Flow, Level, Temperature, Pressure etc. and other aspects related to PLC Control.
 
Features: -
* Compact Ergonomic Design.
* User Friendly, Self Explanatory Systems.
* Leak proof Safety Measures, sturdy piping.
* Enhanced Electrical Safety Considerations.
* Training Manuals, mimic Charts for Operation Ease.
* System Frame with Caster Wheel Arrangement for ease in movement.
* M.S. powder coated cubical plant with standard Instrument Mountings.
* Inbuilt Safety Measures to avoid improper usage.
* Computer Interface (Optional).
 
 
 
Home | About us | Services | Calibration | Training program | Projects | Seminars | Careers | Inquiry | Clients | Lab Support | Contact Us
Copyrights 2012 @ All rights reserved by SM Micrro Systems. Design | designdreams.in